For a professional fisherman, making fishing tackle with your own hands is an activity that brings the same pleasure as fishing. By creating new gear, feeders, baits and other devices, a fisherman can increase the fish catch several times. For making tackle at home, improvised means and tools are excellent.

Making fishing tackle is a fascinating activity.

If a fisherman makes fishing devices with his own hands, he must use the following materials and tools in his creativity:

Wood. From wood, a fisherman may need planks and bars. The wood is excellent for wobblers and poppers.
Metal plates. Petals for spinners can be made from this material.
Wire. Can be used as mounts and rings for baits.
Hammer.
Saw.
Sandpaper.
File.
Materials for covering tackle and other devices (varnish, paint).

To make a fishing device with your own hands, it is enough to have available tools and materials.

Helicopter tackle is a popular winter tackle.

The helicopter structure consists of the following elements:

Hard spinner.
Long leash.
Short leash with hooks.
Retaining ring.
Sliding sinker.
Main line.
Fixing cambric.
Reel, necessary for attaching all the gear.
Bite alarm.

Making fishing gear is very simple. Helicopter gear is made from tin. Thin tin cans are perfect.

The diameter of the pinwheel reaches five centimeters and it is attached to a leash, the length of which is one and a half meters, and the diameter is 0.22-0.25 millimeters.

Four short leashes of 15 centimeters each, 0.15-0.2 millimeters wide, are mounted to the long leash. Fastening can be done using a swivel. Place hooks on leashes. The leashes are attached at the same distance from each other.

The leashes are attached to the main line with a diameter of up to 0.45 millimeters with a locking ring. A flat weight weighing up to 80 grams is mounted on the fishing line.

Place a cambric up to four centimeters long and up to half a centimeter in diameter just above the load. The cambric fixes the fishing line on the whip, which notifies the fisherman about a bite.

Willow branches are placed under the whip, which can be collected on the river along the shore.
Before fishing with a helicopter, the fisherman must drill a hole in the direction of the current at an angle.

The hole is cleared of ice and fishing gear is installed:

a pre-bent pinwheel is passed into the hole. It is necessary to bend it so that it plays better in the water and has resistance to fast flow;
the bait is placed on the hooks, and the assembled tackle is lowered completely into the water;
after reaching the bottom load, the cambric should be pulled and secured at the end of the whip, which should be located at the hole;
the excess fishing line is wound on the reel. It should be next to the whip.

Having made a helicopter with his own hands, a fisherman will be able to fish constantly in winter and catch big fish.

To make a wobbler yourself, you should take wood from deciduous trees. The optimal length of oval wood is five centimeters.

We assemble the wobbler with our own hands:

A one and a half centimeter block should be cut from the wood.
Draw a wobbler fish on the resulting block.
Trim the excess wood along the contour with a knife.
Make a mark with a pencil in the front part of the future wobbler, and then cut out a cavity to create a blade. Cut the belly along the length of the bait. A fastener made of stainless wire will be inserted into this place.
Insert wire in the form of rings into the intended place and fill with epoxy glue.
Apply varnish to the finished wobbler. Once the varnish has dried, hang treble hooks on the workpiece.
Adjustment of the level of buoyancy must be done using lead weights, which are attached to the holes in the abdomen between the nasal and abdominal loops.
Sand the bait and re-varnish it with a waterproof effect.
Next, prepare a blade from aluminum cans, which should be glued into the wobbler.

By following the instructions for making a wobbler, you can get an excellent specimen, which will later be used to equip a fishing rod.

DIY mandula

How to assemble a mandula? You can make a mandula from polyurethane foam. The material is obtained from various rugs and women's slippers. Mandula is great for pike perch fishing.
For the mandula you will need multi-colored polyurethane foam, double or triple hooks, wire 0.5-0.7 mm wide, a cotton swab, red wool, pliers, pliers, wire cutters, an awl, highly water-resistant glue, and a knife.

Method for preparing mandula:

cut polyurethane foam into cubes;
stack the cubes on top of each other and coat the layers with glue;
burn the center of the structure with a hot awl;
the structure should be made cone-shaped using a knife. The awl should remain in the plates;
a cotton swab is mounted in one of the cones;
Take the pliers and make a loop at the end of the wire. The other end is attached to the hook;
the prepared cone is placed on the hook;
A fly is tied from red wool with glue. While the product is drying, a polyurethane foam plate is put on the second hook to make it more buoyant;
all structures must be assembled together by twisting wire.

It is possible to make a mandula from polyurethane foam. With such equipment it is excellent to catch a predator.

Such baits are also called spoons. To make a spinner, you will need a cross-shaped hammer with balls at the end, a wooden board with a recess in the middle, a rubberized steel shaft, a metal ball, a drill, a hacksaw, and a steel stylus.

Stages of creating an oscillator petal:

Make a petal template on cardboard.
Make a contour on a one and a half millimeter sheet of metal using a stylus according to the template.
Clamp the sheet and cut out the petal according to the template with a hacksaw.
Fix the workpiece in the recess of the board.
Remove uneven areas along the edges and make holes for the rings.

Manual vibrators are made of metal and wood. The simple design will allow you to catch excellent fish.

Making a spinner spoon

The spinner frame is made of stainless steel wire. Its length must be at least one hundred millimeters and its diameter 0.8 millimeters.

Manufacturing stages:

The curvature of the wire is removed with pliers, slings or chawls.
The petal is made from 0.33 liter aluminum cans. Due to the softness of aluminum, it can be cut with scissors.
Make holes on the wire with a thick needle to secure the petals.
Assembly. One end of the wire is twisted into a ring with pliers. Then a bead and a petal are put on. The structure is secured with another bead.

You can increase the weight of the spinner by choosing a long wire, as well as using a sinker with a hole.

It is better to make a spinner out of wire. It is subsequently weighted with a sinker.

To make a castmaster you will need an empty metal pipe with a cross-section of sixteen millimeters and lead.

The tools you will need are a hacksaw, a drill, a drill up to three millimeters, a file, a vice, a caliper, and a soldering iron.

Let's assemble the castmaster ourselves:

the pipe is clamped into a jaw and the workpiece is sawed off. The cutting angle must correspond to the original castmaster and measurement angle;
make holes in the centers of both ends of the workpiece;
tin the workpiece from the inside so that the lead does not fall out;
seal the holes with masking tape and let it dry;
Close the remaining holes with molten tin. To carry out this stage you will need a soldering iron;
process with sandpaper and drill lead through the holes in the pipe.

A castmaster is made from a small hollow tube. You should work with lead carefully, as it emits fumes that are harmful to health.

DIY balancer

Such a balancer may be needed when fishing in winter. It looks like a voluminous bait that looks like a fish.

Manufacturing stages:

It is created from light metal alloys.
The hooks are attached to the head or tail of the workpiece, the sharp end should point upward.
Two loops are attached to the back and belly of the bait. The first is necessary for the fishing line, and the second for the threesome.

A balancer is a piece of equipment that looks like a fish and is used in winter. Homemade balancers guarantee a good catch.

Foam rubber is prepared in the form of fish from foam rubber sponges of different colors.

Manufacturing stages:

Before starting work, you should wet and squeeze out the sponge;
then a fish measuring 3-8 centimeters is cut out;
can be attached to jigs without glue;
If you want to attach a treble hook to the bait, you need to make a cut, and then insert the hook and secure it with water-repellent glue.

To make your own accessories, you may also need a dishwashing sponge. It is used to make foam fish that can attract a large school of fish.

Mormyshki at home

For jigs you will need lead or lead-tin alloys and gypsum. You should prepare the jig in the fresh air or wearing a mask, as lead is toxic.

Manufacturing stages:

Create a plaster mold. Pour plaster into a matchbox and place a jig in the middle.
After the plaster has dried, the jig is removed. The mold is cleaned and channels are created for pouring tin.

The jig is the simplest bait, which is very easy to make yourself. It is necessary to prepare plaster and mold.

DIY bite alarms

To create an electronic signaling device, you will need a bicycle spoke, an electronic and bite signaling device with a rod mount.

Manufacturing stages:

Attach the spoke to the signal roller.
On the other side, a barrel is secured.
The resulting alarm is mounted on the rod stand.

You can also make bite alarms yourself. The basis is a bicycle spoke and a purchased signaling device.

To catch fish with a float rod, artificial baits are required that imitate crustaceans, worms, and maggots.

For good fishing, the bait must have an attractive smell to the fish.

Aromatic drops are often used:

anise;
vanilla;
garlic.

As bait, you can use wet and dry flies made from wool, feathers, cork, foam, and colored threads.

To prepare fishing tackle at home, it is enough to use available materials: wooden blocks, polystyrene foam, wool, feathers, threads, and so on. Before making homemade products, you should understand what it will look like in the future and what kind of fish can be caught with it. Properly made tackle will help the angler catch a great catch.

Many fishermen devote all their free time to their favorite pastime, looking for any way to go fishing as quickly as possible. And while some cannot imagine life without store-bought tackle and bait, others constantly make fishing tackle with their own hands, claiming that they are no less effective than store-bought products. The main thing is that they are made correctly.

DIY silicone baits

A variety of artificial baits are used for fishing with spinning tackle. Particularly popular are silicone products, which create a high-quality imitation of the behavior of live fish and attract predators well. However, such baits are subject to wear and tear, so with prolonged use, contact with ferocious fish or other mechanical stress, they lose their appearance and are no longer suitable for further fishing. But is there any point in throwing them away after that? Of course not. After all, if you put together several silicones, you can use them to create new, quite attractive attachments.

So, the step-by-step guide for recycling old silicone products is as follows:

Making wobblers at home

Also, many fishermen know how to make homemade wobblers for pike with their own hands, saving themselves from the high costs of purchasing expensive store-bought models. The process itself looks very fun and simple, because it does not require the use of special equipment or tools.

If you are going to make a wobbler, follow these instructions:

Homemade spoons for pike and perch

Another indispensable fishing accessory is a spoon. There are two popular varieties of these lures - rotating and oscillating. The first type is very easy to make, provided that you have minimal skills in working with tools and materials . During the manufacturing process it is necessary to apply:

An ordinary paper clip.
Tee.
A metal plate, 0.5−1 mm thick.
A tiny bead.
A piece of sheet lead.
File, needle files, scissors and pliers.

At the beginning of the work, the shape of a petal for the future bait is drawn on a piece of cardboard, after which the drawing is transferred to the metal. You need to take scissors and carefully cut the petal from a metal blank, after which it should be carefully processed with a file to prevent the appearance of burrs and other defects. Two holes are made along the edges of the petal (one on each edge), and a file is also processed. Places where there are holes can be bent 90 degrees relative to the petal. Next, all that remains is to take the wire and straighten it, and at one end form a loop and install a treble hook.

Then you need to put a petal and a bead on the same wire, and then again form a loop for attaching the fishing line. Moreover, it is important to again make a loop on which the fishing line will be attached so that it does not interfere with the free rotation of the petal.

In order for a homemade bait to work well enough, it must be properly configured using the additional loading method. A lead weight should be installed between the tee and the petal, calculating everything with great care. At the last stage of making the spinner, all that remains is to give it the required color.

Not a secret that to cast the tackle over a long distance from your own location, as well as to reliably immerse the tackle to depth, it is necessary to use a suitable sinker. And although in some cases fishermen use any metal objects with the appropriate weight, if you approach the issue of making a sinker correctly, this will increase the chances of successful fishing in any conditions.

The following requirements apply to a high-quality sinker:

It must be heavy, so it is preferable to choose lead as the base, which has the highest density among all other materials available to the average fisherman.
It must have a streamlined shape with a perfectly smooth surface, because when casting, the sinker succumbs to aerodynamic forces, and any roughness disrupts the flight range.
It must have a reliable fixation point with the fishing line.
It should remain invisible so as not to cause increased caution in the fish.
It must be accessible.

Making a sinker for fishing with your own hands is not difficult.

Many experienced anglers cast a lead sinker in an aluminum spoon. To do this you should take:

First you need to place the selected vessel for smelting on a burner or fire, and then place small lead there. After waiting for the metal to melt, it should be placed in a spoon. After the material hardens, it can be separated from the aluminum surface of the spoon and used as a sinker.

Creating a bait trap

Not a secret, that the issue of storing live bait for spinning pike fishing worries many fishermen. And if in spring or autumn live bait remains viable for a long time and remains mobile, then in summer they can die in a couple of hours. But catching new ones may take too much time, and the fisherman does not always have the appropriate gear with him. However, if you make a simple and uncomplicated device from two plastic bottles, the problem will automatically disappear.

Step by step guide to making a trap:

So, first you need to take a two-liter bottle and cut off its neck. Then, on the same side, you need to cut off the neck in a wide part, which will allow you to get a part that resembles a watering can. The bottom of this bottle is still cut off.
We take the second bottle and cut off its bottom, at a distance of 5-7 cm from the maximum thickness.
Next, the structure should be assembled by inserting the cut “watering can” back, but now in the opposite way, placing the thinnest section inside. As a result, the structure is connected to each other with artificial threads.
A weight and rope should be attached to the trap.

To test the device in real conditions, you need to place bait in it and lower it to the bottom of the reservoir where fishing takes place. Small fish will immediately become interested in an attractive bait and try to eat it. Once she is trapped, there is no way back. Now, when you need to find live bait, it will always be there.

How to make a zherlitsa with your own hands

For winter fishing for predatory fish, in particular pike, as well as large pike perch, it is customary to use a jig and a popular tackle - a girder. And although it was invented a long time ago, many experienced and novice fishermen are constantly interested in making such a tool with their own hands. In fact, it is easy to make a vent, because its design remains simple and uncomplicated.

As the basis for the future gear, a sewer PVC pipe 32 millimeters thick is used, which should be divided into 10-15 cm sections. Any unevenness and external defects can be smoothed out with a file.

Then three holes should be made in the pipe: two are made on one side, one against the other, which is necessary to fix the tripod, and one on the reverse side, where it will act as a line stopper.

The stopper is formed in the shape of the letter “P”, and it should not interfere with the free movement of the fishing line. Then you need to create a ring of fishing line with a diameter of 0.4-0.5 millimeters. Its purpose is to attach the girder to a metal rod that will be driven into the ice. Also, up to 10 meters of fishing line is wound around a piece of pipe, to the end of which a weight and a hook, preferably a tee, are attached.

Homemade baits for crucian carp

In addition to gear and other important devices, many fishermen create effective bait for fish. It is no secret that for each underwater inhabitant it is necessary to select the appropriate bait composition. Otherwise, the desired trophy will simply ignore the offered bait and go deeper.

If we talk about catching crucian carp, then to increase the efficiency of the upcoming fishing, you can use a unique product based on semolina, which should be prepared according to a special recipe.

So, first you need to pour water into a container and add a few drops of flavoring, and then put it on the fire and bring to a boil. Semolina is placed in boiling water and constantly stirred until a homogeneous thick mass is formed. Then the fire is turned off, and the porridge is moved to the appropriate place to cool and steam. As soon as it reaches room temperature, you can begin to knead it with your hands, which will increase its density. Then the porridge is wrapped in several layers of gauze, but not with polyethylene. Based on this mixture, balls are created and placed on a hook.

In addition to the above instructions for making fishing devices, there are many others that are amazing in their effectiveness and ease of installation. Therefore, if you do not want to support someone else's business, and believe that homemade baits and tackle can be effective for any fishing conditions, continue to look for instructions and ways to create such products from available materials.

Attention, TODAY only!

Chub

Do it yourself

In this article we will talk about how you can make a fishing rod for winter trolling with your own hands. Someone will ask: “Why, since everything ready-made has been in stores for a long time?”, but since you came to this article, it means you need it and are interested. Not everyone is too lazy to make the tackle themselves; some people like it, while others, perhaps, simply don’t have it...

Perch

Do you want to learn how to make lures for pike and perch with your own hands? Well, some people like to buy beautiful lures in fishing stores, keep track of new products and add to their collections. Expensive purchased spoons, for the most part, have good catchability, and some of them are really very catchy. Here are examples of such spinners for perch and pike. But, k..

Winter fishing

Since you have come to this article on the site, it means that you have decided not to buy a fishing rod for winter fishing, but to make it yourself. Well, that's a good idea! Making tackle with your own hands is very exciting and, by the way, profitable! Someone doesn’t understand why make a winter fishing rod yourself if you can just go to a fishing store and choose one..

Winter fishing

Many fishermen who have sufficient fishing experience have become accustomed to making many fishing tackles and baits with their own hands. I highly recommend that a beginner start using homemade baits for several reasons. The main ones are: If you are a beginner, you do not know how the bait should work when catching a particular fish and you may make mistakes in manufacturing,..

white cupid

Who doesn't want to catch grass carp? Every fisherman dreams of having this handsome guy in his catch. Some succeed, but some are still unlucky with their catch. In this article I will tell you how to increase your chances of catching grass carp or catching your first trophy. To do this, we just need to prepare the right bait..

Do it yourself

Bombarda or sbirulino, as it is also called, has Italian roots. It is a weighted float that allows you to make long casts of light bait and fish almost any horizon of a reservoir. Bombards can be divided into 3 types: floating; neutral; drowning. The float of a floating bombard remains on the surface of the water after casting and does not sink. The float of the neutral bombard begins to slowly sink under..

Do it yourself

Bait for fishing is always necessary. If you fish without using fish bait, then know that you are losing most of the fish that you could catch. Store-bought bait is good, but expensive. But if you learn how to make bait for fishing with your own hands, you can easily make it at home. Such bait will cost you less...

crucian carp

Bait for crucian carp prepared by yourself is a great way to ensure yourself a good catch. Crucian carp is very fond of baited places. You've probably noticed how the lack of bite of this peaceful fish can easily be corrected by throwing a small amount of bait at the fishing point. So, crucian carp responds well to almost any bait, but there are options that are cheaper than store-bought ones and much...

Do it yourself

Pike fishing continues in winter; anglers are putting their spinning rods in the closet and picking up winter rods and lures. But this article concerns specifically fishing for pike with winter rods, or rather, about the bait itself - a spinner. What lures to use to catch pike in winter is the main topic of this article, and that’s what we’ll talk about. A fisherman's arsenal should always...

Do it yourself

Many fishermen catch or want to try to catch fish with this type of gear such as a girder. Zherlitsa is a very effective fishing tackle, fishing with which occurs passively, that is, without the direct participation of the fisherman. The design of this gear is elementary, so it’s very easy to make a vent yourself. In this article we will look at how to make a vent with your own hands. By the way, I would like to note that...

Do it yourself

A marker float is an indispensable thing when it is necessary to mark the fishing location when fishing with a feeder. By installing it at a specific point in the reservoir, you can no longer make mistakes when casting the tackle. Typically, marker floats indicate recesses, holes, or simply baited areas. After all, you will agree that if you throw the tackle exactly into the baited place, then the chances of a catch increase significantly. ..

Do it yourself

Many fishermen prefer homemade floats to purchased ones and want to learn how to make a float with their own hands, rather than buying them in a store. Floats can be made of any shape that you like and can also be painted in your favorite color, which will please your eye while fishing or which seems less noticeable to the eyes of the fish. This article will tell..

Do it yourself

Why is boilie better? Boilie is a modern bait that is used for catching carp fish species, mainly for carp and carp. Why is boilie a priority when there are many more affordable and natural baits? Because a boilie, unlike a worm, pearl barley or dough, is designed exclusively for large fish. The larger...

DIY or DIY fishing gear

Why buy something you can make yourself? DIY fishing gear is a hobby for many fishermen. No, this does not mean at all that it is not possible to buy a float, feeder or other piece of equipment. Many fishermen have the money for the best gear, but still prefer to make some parts themselves. Some just out of interest, and some because they manage to make the most suitable option for themselves.

Regularly adding new articles will allow you to learn something new every time and try to do it yourself. You will learn how to make floats, spoons, jigs, marker floats and much more.

Fishing has long ceased to be a simple entertainment and hobby; for many men, this is the time when they can relax, take a break from problems and focus on a complex but interesting process, and homemade fishing tools for summer fishing will help with this. Therefore, there are a great many ways to fish, as well as varieties of fishing tackle, everyone selects them to suit their own needs, and some even create several home-made fishing products for summer fishing. This could be a simple hand-made wooden stick with fishing line and worms, or a high-tech novelty, complemented by your own spinners and modern baits for predatory fish.

And it doesn’t matter how you prefer to fish: the old fashioned way or using modern gadgets - a homemade fishing device for summer fishing will help you adjust a ready-made device to your requirements. Since ancient times, fishermen had to make everything themselves, and even in the modern world, many experienced people prefer to rely on equipment they created themselves, which will never fail, unlike purchased ones.

This practice is common because factory production is set up to create crafts that will suit as many situations as possible, and with rare exceptions they do not take into account many details.

So, what can you do yourself to make summer fishing easier if you are new to this activity?

No matter how developed your imagination is and no matter how varied your DIY fishing gear may look, they can still be classified into one of 8 main types:

a spoon is one of the most necessary things when fishing on a river;
feeder - helps you not to bother with additional feeding;
A float is the main gear that will help you understand whether the fish has eaten the bait along with the hook. Some experienced fishermen prefer to get rid of floats and follow the movement of the line, but this requires many years of training and not everyone can master this style;
mugs or otherwise called zherlitsy;
fishing rods are the main component, and with proper skill you can make your own fishing rod. They also have many varieties;
equipment - various additions to the fishing rod that simplify fishing and change it to suit the needs of the environment;
nods - help to more accurately recognize the catch;
homemade boats - their creation requires experience in woodworking and carpentry, but they can also be made from polymers.

With rare exceptions, almost all fishing homemade products fall under this type, and if you miss fishing rods and boats that are difficult to implement, then you can make most of the other gear yourself.

A very common and indispensable equipment when hunting predatory fish:

Thanks to vibrations due to the flow of the river or the movement of the fishing rod, it allows you to imitate fish or other small animals.
Easy to make and use.

It is most convenient to use them in conjunction with a spinning rod, and these are the simplest fishing homemade products that anyone can do. In order to make homemade spinners, it is enough to make “petals”, which are cut out of metal according to pre-marked templates. After that, several holes are drilled in such a part, and it itself is bent at a right angle so that the first and second holes are on the same straight line. Next, this entire structure is secured to the main fishing line in a simple way.
You can experiment with templates from the Internet or create your own, but to make the work easier, it is better to use ductile metals that are not subject to rapid oxidation.

Float

It is impossible to imagine modern fishing without a float; it has become a kind of symbol of fishing and is displayed on signs in specialized stores.

Most beginners think that this gear has a couple of trivial functions:

hook support at a given depth;
bite signal.

In reality, everything is completely different, and, depending on modifications, this simple equipment can perform dozens of different functions. If we talk about the design, then it is a simple “stick” attached to a fishing line, the lower part of which is in the water, and the upper part is above it and should record the movements of the hook. This base can be supplemented in a variety of ways, as evidenced by the many varieties of floats, and each fits its own individual situation, performing specific tasks.
Creating a float at home is accessible to anyone, because its main characteristic is its density is lower than that of water. Therefore, for the base, you can use any container with air that will allow the homemade product to float, so that it does not turn over from side to side, you need to install a keel or weight on one side, in simple terms. Attach a signal antenna on top, which should be drawn out in advance. Next, all that remains is to find a metal ring or rubber band that will allow you to attach it all to the fishing line and your homemade float is ready!

Experiment with shapes and materials, but always take into account the Archimedean force, which must exceed the attraction of the hook with bait, and you can equalize it thanks to weights.

Classification

Fishing tricks and homemade products that exist today can be divided into several categories, each of which is distinguished by its practical application. The first of them contains various gear. These can be products that successfully copy foreign analogues, the cost of which is simply fabulous, or real inventions of fishing enthusiasts. This group includes floats and hooks, leashes and spoons, donks, jigs and much more.

In the second category there are fishing tricks and homemade products that have already been sufficiently tested by experience. This also includes complementary foods, various types of baits and attachments, as well as invented fishing methods and techniques. This is a fairly large topic in which questions are discussed about how to fish in one place or another and at one time or another of the year.

The third, quite extensive group includes various accessories - either invented or copied from existing samples. They represent a variety of devices that allow:

Increase the shelf life of fish in hot weather;
- dress properly so as not to freeze on the ice in winter;
- save bloodworms and other bait by placing them in special containers.

So, what are the most popular fishing tricks and homemade products that are made from scrap materials?

Toothbrush poppers

Very often, fishing tricks and homemade products literally amaze you with the imagination of the craftsman who made them. This surface bait from a foreign manufacturer can be quite expensive. That is why it makes sense to make it yourself. Poppers, also called walkers, being surface baits, should not sink. Only their slight submersion is permissible. What material can be used that will float well on water? These are toothbrushes that are primarily tested for buoyancy. This is quite easy to do. It is enough to fill an ordinary bucket with water and throw a brush in it. It must float on the surface and not sink.

The work is done using a small grinder with replaceable attachments, which looks like a micro-grinder. Making this clever fishing tackle begins with sawing off the part with bristles from the brush. The resulting edge should be processed with a sandpaper attachment. You will need to make a small hole in the top and bottom. It is necessary for fastening the tee with a ring with a swivel. Next, the homemade bait needs to be tinted. The colors must be bright, for example, green and red. Tees are inserted into the almost finished product. If you test the resulting structure in the bathroom, you will find that due to its heavy weight it is pulled to the bottom. A narrow strip of foam glued on top with superglue will help avoid this. In this option, the popper will float well on the water and will stop sinking.

Wobblers

In a fisherman's workshop, homemade fishing tricks can be made from a variety of materials. However, for wobblers it is best to take birch. This tree is perfectly processed and does not splinter during work. At the first stage of manufacturing the future bait, its body is sharpened using a cutter. After this, the resulting workpiece is processed first with coarse and then with fine sandpaper. In this case, the wobbler will be smooth and will not have any burrs.

The product will require fastening loops, which can be made from cornice string. The wire is bent in the form of a slightly twisted letter “P” (to hold better). In addition, for strength, one end of the letter should be slightly longer than the other. Next, the bracket is driven into the wobbler. To do this, use “nails” cut from wire of the same diameter.

The wobbler must have a certain weight. That is why it is surrounded by inserting a small tin plate into a cut out triangular depression in the abdomen.

At the next stage, the wobblers are painted using gouache. In the most critical places, it is advisable to use a gel pen, which will give the color clarity. After this, the bait should be coated with varnish in 2-3 layers.

Lastly, the blade is inserted. It can be made from unnecessary computer disks with paint removed from one side using a needle. Next, a cut is made in the disk using a hand jigsaw and the part is inserted into the wobbler.

Spinner for pike perch

Fishing tricks and homemade products for fishing can be made from anything. Sometimes even broken tweezers are used for this. This tool itself is of high quality and is made of stainless steel. That is why it can serve as an excellent lure for pike perch. As you know, this fish is a predator characterized by a narrow throat. So the spinner also needs to be narrow. In this case, tweezers are just perfect. From one leg of this cosmetic instrument you will need to cut a piece of the required length. It is sanded a little. This allows you to give the part the desired shape and rid it of small burrs.

The next stage of work is drilling the holes. They are needed to attach the fishing line and tee using swivels and rings. It is worth keeping in mind that this procedure is not easy. The selected material is quite durable, and a thin drill may even break during operation.

At the end of this stage, the threesome is screwed on. It is better to do this from the heaviest side, otherwise the spoon will not hold well in the water. For those who wish to give their product an aesthetic appearance, it is recommended to cut scales on it. This piece of tweezers already has transverse layers. All that remains is to make a few longitudinal, even cuts and the shiny lure for perch or pike perch will be completely ready for fishing. It is worth noting that such homemade products are no worse than branded ones. And the one made from tweezers can even be called the best. After all, in it the tee is located on the heaviest side, which allows you to avoid spinner overturns and overlaps.

Summer trifles

There are many fishing tricks and a huge number of homemade products have been invented that are used not only by beginners, but also by experienced fishermen in the warm season. Summer fishing has its own specifics. During this process, special attention is required to preserve the catch. After all, fish quickly deteriorates in hot weather, and by evening you may just have to throw it away.

Saving what is caught

After the fish has been pulled out of the water onto the shore, it should be carefully (so as not to squeeze the insides) removed from the hook. And if the catch was severely injured, then it should not be placed in a bucket with the rest of the catch. Such actions will lead to the fact that within a few hours all the fish will spoil in the heat.

Wounded prey should be killed and gutted, and then wrapped in fresh grass (preferably nettles). It is better to store such fish in the shade, where it will be blown by the breeze and be cool. If there is no such place nearby, then the gutted prey should simply be salted.

Live storage

For many fishermen, bringing home a live catch is important. To do this, the fish must be stored in water, while being in a kukan or in a cage. The mesh of the latter should not be metal, since the prey will attempt to get out into the reservoir, which will lead to severe injury. You need to hang the cage in the shade, deepening it into the water enough to allow the fish not to bump into each other when swimming. In addition, in cramped conditions, the catch is in danger of self-poisoning with products released as a result of metabolism.

Homemade fish tank

This fishing item is offered by all specialized stores. However, if the cage is branded, then the price for it is set such that not every fisherman can afford to purchase it.

For the summer season, this accessory can be made independently. At the same time, it will be quite wide, long, and, if desired, foldable.

How to make this fishing homemade product? To do this you need to take a strong wire. You can use ready-made metal rings. To create a compact tackle, you will need three of them at once, but with different diameters - large, medium and small. You will also need a nylon mesh. The one that was previously used for windows as protection against mosquitoes will come in handy. A product similar to a sock is sewn from such a mesh. It must match the diameter of the rings. They need to put on such a sock and attach it with small stitches. To keep the fish in the cage you will also need a lid. It is made from a nylon mesh stretched over another wire ring. To secure the entire structure, the fisherman must use small tricks. They consist of using a nylon rope tied to the structure with a secure knot. Otherwise, the fish tank with its catch may float away with the flow. And to prevent the prey from going to the bottom, you can attach a small children's lifebuoy to the upper ring.

DIY floats

Fishermen like to make this small device, which signals a bite, with their own hands. First of all, because there is no point in buying something that you can do yourself. In addition, DIY fishing crafts and tricks are a hobby for many water hunting enthusiasts. And this does not mean that buying a float in a store is impossible due to its high cost. Many fishermen can afford to purchase the best that a modern manufacturer offers. However, the peculiarity of fishing tricks and gear made at home is that they are sometimes the most suitable option for successful fishing.

For many fishermen, homemade floats are much better than store-bought ones. After all, they can be made in any shape and painted in the most pleasing color to the eye. And making this gear is quite simple. Just keep in mind that the first products are unlikely to be ideal. But then, as they gain experience, each fisherman will be able to refine their crafts, as well as come up with different and most unusual options for floats.

Similar gear made from goose feathers is good. This material is easy to find in any body of water that these birds prefer. The feathers they have lost sometimes simply float on the surface of the water. All that remains is to bend down and pick up this unique natural material.

Hand-made floats can be of different sizes. Large ones are for larger fish, and vice versa. You will need to cut off everything unnecessary from the feather, leaving only its base. As a result, only a light, thin, but at the same time quite strong stick will remain in your hands. Everything unnecessary should also be cut off from its upper side. From below, that is, in the place where the feather should be attached to the skin of the bird, you cannot touch it. Otherwise, the resulting float will constantly get wet. To perform these works, which will allow you to make the main part of the float, you will need a sharp stationery knife. After completion of the work, the product is painted in bright colors, which will allow it to be much more noticeable on the water. It's easier to do this with nail polish that is water-resistant. The cut part of the float provides a fastening for fishing line.

Fishing for crucian carp

This fish is one of the most popular among professionals and beginner fishing enthusiasts, as it lives in almost every body of water. You can ensure yourself a successful time with a fishing rod if you use a few tricks for catching crucian carp.

And you should start with complementary foods. It is worth keeping in mind that crucian carp are very sensitive to odors. That is why he does not always respond to the complementary foods offered by specialized stores. A little trick for anglers when catching crucian carp is to use regular feed, to which pre-ground roasted seeds have been added. This mixture is pre-wetted. This allows it to settle to the bottom of the reservoir. Crucian carp do not bite very actively when using regular dough with grain flour. To correct the situation, you can add a little valerian tincture to complementary foods.

One of the unusual ways to get an excellent catch is to singe the hooves of cattle over a fire. While still smoking, they are thrown into the water, which contributes to an excellent bite.

There are other fishing tricks and homemade products for crucian carp. So, for a good catch, so-called spring nipples are often used. Such tackle is designed for the fact that crucian carp likes to suck food from the bottom into its mouth. That is why hooks are taken on short leashes and then hidden in bait located in feeders made from bottle caps, as well as from wire twisted into a spring with a concave lead plate. During feeding, the crucian carp swallows the bait, and with it the hooks.

In the cold season

There are also winter fishing tricks and homemade products. They make fishing easier and create a certain comfort when a person is in difficult weather conditions. One of the accessories that is not at all difficult to make with your own hands is a gaff. For it you will need a handle from an old umbrella and a sharpened metal rod. You can take an electrode from which the insulating layer has previously been knocked off. One end of such a metal rod should be sharpened and bent into the shape of a hook, and the other should be flattened on an anvil. You will also need a plastic dowel for the hook. It is put on the rod, sliding it to its flattened part. Next, the dowel is inserted into the umbrella tube. It is fixed to it by flattening.

Many fishing tricks and homemade products for winter fishing protect a person with a fishing rod from various kinds of dangers. So, every fisherman moving on ice needs to carry so-called life preservers. These are two wooden handles turned on a lathe, in each of which a sharpened steel pin is fixed using epoxy glue. These parts are connected to each other with a rope, the length of which is 30-50 cm less than the height of the fisherman. “Rescue bags” are worn around the neck. If a fisherman falls through the ice, he must stick the pins into the edge near the water and climb up, standing on the rope as a step.

Many fishing tricks and homemade products, the ideas of which are presented above, have been actively used by anglers in many countries for decades.