Goatee rig for pike perch. Pike perch beard - manufacturing. Installation of equipment and necessary gear for chinfishing

When catching pike perch or pike, modern fishermen often use balancers, spoons, and twisters. In general, today there are a lot of baits for catching predatory fish. Any of them copes with the task quite well, which is proven in practice.

But there is also no need to “write off” the old grandfather’s methods of fishing, which are often more effective, but few people remember about them, and they hardly know or even heard of them even once.

One of such gear is a reverse jig (another name for the bait is a jig with an edge). They hooked a live bait fish to it and caught predatory fish. And the results always pleased the fishermen of that time. And, if there were no live bait fish on hand, then a strand of goat’s beard was tied onto such a jig. That's what they said - catch a goat's beard.

Devil jig with tied goat hair - goat beard

Goatee

goat beard– this is another fishing tale. Predatory fish were caught using a goat's beard both a hundred and two hundred years ago. By the way, it may not be a beard at all. And a bunch of goat hair from anywhere. Goat hair has a peculiar aroma to which predatory fish respond well, and therefore pike and pike perch respond well to goat beard.

The goat beard bait is in no way inferior in effectiveness to modern expensive spinners. It is not a pity to tear off a tuft of goat hair when it is hooked by tying another tuft of goat hair to the fishing line. But to cut off an expensive bait - oh, sometimes what a pity.

Asp on goat beard bait

That's why. It’s not time to forget about old-fashioned fishing methods; they are simple, cheap, but no less effective. In addition to pike and pike perch, goat's beard will also interest perch, asp, and other predators of your pond. And you can fish with it, just like in the summer in open water. and in winter from the ice.

Fishing for asp has its own characteristics. This predator has cunning habits, and a successful catch depends on the knowledge and dexterity of the fisherman. Tackle plays an important role. Experienced fishermen advise fishing with a spinning or match rod. The best bait for fly fishing is an asp beard. A predator will definitely be interested in “live” bait if it is correctly selected and used.

Streamer for asp

A barb or streamer is a fishing tackle used in fly fishing. Its appearance imitates a living fish, mouse, tadpole or frog. All those living creatures that predatory fish love to feast on.

Nozzle structure:

hook with a long shank;
body;
tail;
wings.

You can make a beard yourself or purchase a ready-made one. For knitting this type of nozzle, natural or synthetic fibers are used. This can be rabbit fur, goat or other animal wool, poultry or stork feathers, or artificial fibers.

Photo 1. Homemade streamer beard.

In water, all these materials hold volume well and vibrate like living organisms. But each of them has its own characteristics:

Fur and wool have poor windage when casting, but their movements under water are the most natural.
Feathers in the water move smoothly, their trajectory is uniform. This is an excellent bait for asp. Feather barbs are suitable for bodies of water with fast currents.
Synthetic materials in water are not as voluminous as natural ones. Their significant disadvantage is that they do not work well in fast flows.

To make the body of the beard, ordinary foam is most often used. Sometimes a shiny “rain”, silver foil and other “attractions” are added to the tail. The color of the beard is selected depending on the season and type of fish. The best streamer colors for catching asp:

The length should be from 50 to 80 millimeters. Asp can also be caught using a beard made of red material. It reacts better to monochromatic tones.

Equipment

To catch asp with a beard, a spinning rod is used. It should be of normal rigidity, from 2.5 to 3 meters long. You will also need the following items:

coil, necessarily inertial;
main line (0.6) and leader line (0.35-0.40);
strong black hooks, triple or single;
sinker weighing about 32 grams, spherical in shape.

The beard is crocheted. It is necessary to knit tightly so that the hairs cannot be pulled out. Mount the streamer with a white cambric or foam float. If rotating or oscillating spinners are equipped with a beard, then use wool that is half as long.

To mount the equipment, you need a 1 meter piece of fishing line. Swivels are prepared at its ends. One end is equipped with a regular swivel, and the other with a clasp. A spinner or castmaster is attached to a swivel with a clasp.

The first streamer is attached to a 5-7 centimeter leash 25-30 centimeters from the swivel with a clasp. The second streamer is a little higher, at the same distance and on the same leash. The main line is tied to the swivel without a fastener. When fishing with a spinning rod, to increase sensitivity, you can use a cord rather than a monofilament line.

Photo 2. Approximate equipment diagram.

Fishing technique

When choosing a fishing spot, you should use your own hearing. Where you can hear splashing on the water, there is definitely an asp. You can fish the place. It is better to choose the southern sides. In the upper layers of water, fish hunt from spring to winter. It is difficult to say exactly what baiting tactics should be used; in this matter there is nothing better than personal experience.

When catching asp, camouflage plays an important role. When fishing, this is a decisive factor, since the asp is a very cautious fish. He sees the fisherman perfectly in clear water and does not bite the bait. You cannot make noise, talk loudly, or stand at the water's edge at full height.

Photo 3. Catchable beards on asp.

With any fly fishing there are certain technical rules, without which fishing may not work. Initially, you need to grip the rod correctly. The grip with the thumb on top of the handle is very comfortable. To use the index finger in this position, you need to choose a light bit. Fix the cord with your left hand.

Casting Features:

When swinging the spinning rod, the fly line should not fall down.
To accelerate, pull up is used using the movement of the hand in which the cord is located.
Using the “double pull” you can cast the fly up to 20 meters.
If there are obstacles nearby, then a “ring cast” is suitable. This is a backswing in which the loop moves along the surface of the water. This method is not suitable for long casts.

When fishing on a river, the cast is made several meters further, against the current. The stream will pick up the bait and bring it to the probable biting zone. Big fish like to chase fast-moving baits. But they can change their hunting tactics.

Lake predators that are found in reservoirs are distinguished by their hunting tactics. They prefer to wait for prey in the depths of the riverbed. Small baits are suitable here. It is worth noting that asp are more difficult to catch in calm waters.

The fish makes exits at specific time intervals and moves according to an invisible pattern. Outputs are repeated periodically. It is important for the angler to calculate the gap and cast the bait at the moment after the fish strikes. The asp can get used to the bait. After 20-30 casts you need to change it or take a break.

At different times of the year, the asp behaves differently. The choice of location also depends on the season:

In autumn and winter it is better to choose shallow lakes and shallow canals. These may be depressions, shallow estuaries or river banks.
In summer, large bodies of water will be a suitable place. It is better to fish in thickets, on rifts, edges, and near stones.

In autumn, the fish are less active and move to quieter places. At this time, baits are chosen that are heavier than in summer. The bait is carried out at medium depth or along the bottom. This is due to a change in the asp’s hunting tactics. He begins to attack in deeper layers.

In winter it is very difficult to find asp. But during this period, weighty specimens are caught. Lucky fishermen who master the art of deep and slow fishing.

In spring, it is better to catch the predator in the morning. During the spawning period, it is difficult to find the asp during the day, although in other seasons it is active during this period of time. But it is in the morning that he is especially hungry and the likelihood of a good catch is higher.

In summer, especially from late June to mid-August, night fishing can also be successful. Many fishermen advise fishing before a sudden change in weather conditions, from good weather to bad. For example, before a thunderstorm, when atmospheric pressure jumps and the air is filled with heat and moisture.

The chosen time of day also plays an important role. Fish activity varies throughout the day:

By 8-9 am the fish become active.
After 13-14 hours activity decreases.
After 16-17 hours it stops pecking.

It is always worth remembering that the asp is unpredictable, and its activity can change without fitting into any framework.

In places with a bald coastline, the predator can go hunting in the evenings before sunset, when the wind subsides. At this time, insects appear above the water, which are caught by small fish. The asp attacks when these fish accumulate. Where there are many hanging trees over the water, the fish are active throughout the day.

Despite its caution, the asp is a very curious fish. It reacts to splashes and impacts on the water. With this you can attract it by making several blows similar to those made by the predator itself. Most likely, he will immediately sail to the place of the splash to find out what is happening there.

Fishelovka.com

Fishing with Borodka | Tackle Beard | How to make a beard

“20 steps from a complete beginner to a confident beginner in FISHING”

It will be extremely useful for beginning fishermen. But not only that. I have collected the most important components of fishing skill and presented them clearly, systematically, “without water.”

Find out details

nik-fish.com

Fishing with a goatee

The beard, along with the foam fish, can be considered an original domestic invention. Although, perhaps this bait has analogues in other countries. In this post I will tell you what kind of bait this is - a barb, what design features it has, varieties and methods of fishing with a barb.

A barb is a combination of a “body”, a body and a fluffy tail, mounted on a hook (single, double, triple). The body can be either floating, made of polystyrene foam, cork, etc., or regular – cambric of different colors. A wide variety of materials can be used as a tail, but most often these are: goat hair, raincoat, lurex, colored threads, etc. Coloring beards As you understand, by combining bodies and tails of various shapes, sizes and colors, you can create a wide variety of species assortment of beards. Such flexibility and ease of manufacture are the main advantage of the barb bait. Large, voluminous, and sometimes composite barbs can be used to fish as independent baits. But most often, a barb is a bait with minimal weight, which is why they are used in rigs with a separate sinker. A classic example of such equipment is bottom spinning, drop-shot, etc. That is, a sinker is attached to the end of the main line, and a leash or leashes with barbs are attached just above. Leashes are made from thin fishing line, as it is important not to scare the fish with a coarse leash. And since pike are not often specially caught using a barb, they do without metal leashes. Wiring a tackle with barbs is quite simple. By controlling the line at the bottom with a sinker, they play along with the rod, giving the barb various animations. Perch on a barb The barb is considered a classic pike perch bait. However, perch bite very well on smaller barbs. It’s not uncommon to catch pike on the wade, along with catching pike perch or pike perch. Based on materials from: nik-fish.com

handf.mirtesen.ru

Fishing with a beard - Angler's Encyclopedia

The beard, along with the foam fish, can be considered an original domestic invention. Although, perhaps this bait has analogues in other countries. In this post I will tell you what kind of bait this is - “Beard”, what design features it has, varieties and methods of fishing with a beard.

As you understand, by combining bodies and tails of different shapes, sizes and colors, you can create the widest variety of beards. Such flexibility and ease of manufacture are the main advantage of Borodka’s bait.

Large, voluminous, and sometimes composite barbs can be used as independent baits. But most often, a barb is a bait with minimal weight, which is why they are used in rigs with a separate sinker. A classic example of such equipment is bottom spinning, drop-shot, etc. That is, a sinker is attached to the end of the main line, and a leash or leashes with barbs are attached just above. Leashes are made from thin fishing line, as it is important not to scare the fish with a coarse leash. And since pike are not often caught on a specialized basis with a barb, they do without metal leashes.

Wiring tackle with barbs is quite simple. By controlling the line at the bottom with a sinker, they play along with the rod, giving the barb various animations.

The beard is considered a classic pike perch bait. However, perch bite very well on smaller barbs. It’s not uncommon to catch a pike on a ford, at the same time when catching pike perch or pike perch.

Source

A barb or streamer is a fishing tackle used in fly fishing. Its appearance imitates a living fish, mouse, tadpole or frog. All those living creatures that predatory fish love to feast on.

Nozzle structure:

hook with a long shank;
body;
tail;
wings.

Photo 1. Homemade streamer beard.

In water, all these materials hold volume well and vibrate like living organisms. But each of them has its own characteristics:

Fur and wool have poor windage when casting, but their movements under water are the most natural.
Feathers in the water move smoothly, their trajectory is uniform. . Feather barbs are suitable for bodies of water with fast currents.
Synthetic materials in water are not as voluminous as natural ones. Their significant disadvantage is that they do not work well in fast flows.

black;
white;
grey.

The length should be from 50 to 80 millimeters. Asp can also be caught using a beard made of red material. It reacts better to monochromatic tones.

Equipment

To catch asp with a beard, a spinning rod is used. It should be of normal rigidity, from 2.5 to 3 meters long. You will also need the following items:

coil, necessarily inertial;
main line (0.6) and leader line (0.35-0.40);
strong black hooks, triple or single;
sinker weighing about 32 grams, spherical in shape.

Photo 2. Approximate equipment diagram.

Fishing technique

Photo 3. Catchable beards on asp.

Casting Features:

When swinging the spinning rod, the fly line should not fall down.
To accelerate, pull up is used using the movement of the hand in which the cord is located.
Using the “double pull” you can cast the fly up to 20 meters.
If there are obstacles nearby, then a “ring cast” is suitable. This is a backswing in which the loop moves along the surface of the water. This method is not suitable for long casts.

At different times of the year, the asp behaves differently. The choice of location also depends on the season:

In autumn and winter it is better to choose shallow lakes and shallow canals. These may be depressions, shallow estuaries or river banks.
In summer, large bodies of water will be a suitable place. It is better to fish in thickets, on rifts, edges, and near stones.

In winter it is very difficult to find asp. But during this period, weighty specimens are caught. Lucky fishermen who master the art of deep and slow fishing.

In the summer, especially from late June to mid-August, night fishing can also be successful. Many fishermen advise fishing before a sudden change in weather conditions, from good weather to bad. For example, before a thunderstorm, when atmospheric pressure jumps and the air is filled with heat and moisture.

The chosen time of day also plays an important role. Fish activity varies throughout the day:

By 8-9 am the fish become active.
After 13-14 hours activity decreases.
After 16-17 hours it stops pecking.

Advice! It is always worth remembering that the asp is unpredictable, and its activity can change without fitting into any framework.

Pike perch itself is quite unpretentious and careless, so many beginners seem to be an easy prey, but this fish reacts to any meteorological changes, for example, with low pressure it becomes passive and the fisherman has to adapt to its mood, in which case catching pike perch on a retractable leash helps . This is an almost universal tackle that allows you to get not only moral pleasure and relaxation, but also take another trophy to your collection. The main advantage of such equipment for pike perch is that it is convenient to use for deep-sea fishing with donka, and it also shows good results as bait on rivers and lakes. So what mistakes should you avoid when installing a diverter leash for catching pike perch?

In order for you to understand why you should learn to use such equipment for catching pike perch, you should understand its strengths, including:

High activity. A retractable leash on a pike perch can stir up the prey, forcing it to attack even the most attractive bait. But, naturally, this does not give you a reason to relax and hook any gear onto leashes, but it opens up the field for experiments that will not greatly affect your catchability.
Universal. The tackle performs well both in currents and in calm waters, is convenient in the cases already described above, and most importantly, it opens up a whole world of completely new baits for you.
Simple and interesting fishing allows you to use the most convenient methods of hooking fish.

But the freedom that fishing with a retractable leash provides in choosing other elements is still partially limited, because long spinning rods and baits in which the fastening occurs with a cord will have the greatest effectiveness in conjunction with tackle. Using this combination is the kind of advice that professionals often give to inexperienced beginners. All this must be selected according to certain algorithms and taking into account the weight and size of other equipment, as well as fishing conditions. So, it is better to fish from the shore using long, but not very heavy spinning rods, while on a boat you can take short gear, but with a shifted center of gravity, which will open up new fishing methods for you.

Why is the tackle so attractive to predators, especially if Carolina is used with it? The fact is that the main way of fishing with a retrieve is to hit the bottom with a weight, which will attract your prey. The pike perch will begin to attack and end up on your hook, but to do this, you should use a stepwise retrieve method, which will allow you to imitate the movement of the fry as accurately as possible, and thus the bait will become even more attractive to the predator.

If you have spent time studying certain methods of fishing with a leash and practiced separately, while doing each element correctly and honing it to perfection, then the catchability of almost any bait will increase significantly.

Light baits are best suited to such gear, and with the latest trends in the world of fishing, silicone edible bait is also becoming popular. If for some reason you do not have the opportunity to buy leashes or you want to give them some specific characteristics that manufacturers cannot provide, then making a retractable leash with your own hands is not a difficult task. Unlike most baits, you don’t need any specific skills in processing iron or wood, and you’ll spend little time, and fishing will become easier and more enjoyable.

But now you have a ready-made element in your hands, how can you install the equipment so as not to regret the time and resources spent on its production?

There are two most popular methods for installing leashes, in the first case:

You will need to use a sinker and jig with a small foam barb.
Once all components have been assembled, installation can begin. To do this, attach a “tee” to the main fishing line. This is where beginners make a lot of mistakes, but attaching a swivel is actually quite easy if you practice a little. A right angle should form from the eyelet.
Next, the main leash is inserted into this eyelet and attached. Almost all experts, as one, will advise you not to cheap out and take fluorocarbon fishing line; those who have fished on leashes, even with braided ones, know that a predator can easily bite off the bait with a piece of fishing line and leave you without a piece of gear.

Try to mount a foam bead in advance; polystyrene foam is also suitable as a material, but it is usually more difficult to obtain. Naturally, you can use other light baits, but this one will serve as a “control”, from which you can then measure the effectiveness of wobblers and spinners, selecting the best option. Two ears take up the gear, and the third one is attached to the leash itself, up to 0.6 meters long, to which you will later attach various baits.

In this case, the fastening has much more nuances, and it is less reliable, because we are trying to build a fairly neat structure, the main purpose of which is to catch small fish for further preparation for live bait.

Here you will need to prepare the following gear:

a pair of carabiners, with the help of which the main fastening will take place;
weights up to 12 grams weighing in the shape of a cylinder; if you cannot find such, you can replace them with ordinary pellets, but catchability will suffer slightly.

In this case, you can also use a silicone leash, because small fish are unlikely to require the strength of fluorocarbon, but many professionals prefer to play it safe if they suddenly decide to bite a trophy exhibit. Next, one eye of the swivel is attached to the main fishing line, and into the third you pass a pre-cut piece of tackle up to 25 centimeters long. It doesn’t matter here whether the fishing line is monofilament or silicone, the main thing is that it can withstand the loads that even small fish will put on it.

The ends of the fishing line are tied with a nautical knot, but some also use triple knots, depending on which is more convenient. The loop that is formed as a result will serve as the connecting part between the swivel and the sinker.

We use the free eye to attach the leash, as in the previous case, on which the silicone hook should be located. If you find a strong river current, you can always attach a shot to the hook, which will stabilize the bait.

Catching pike perch in winter using amphipods

Currently, fishing stores offer a huge number of baits for winter pike perch fishing. However, you definitely need to pay attention to such bait as amphipod. An amphipod is a spinner that is used to plumb a predator.

The bait received this name due to its ability to move sideways when retrieving. Therefore, catching pike perch using amphipods thanks to the original game often turns out to be quite effective. In addition, amphipods, moving in a circle, make it possible to examine large areas in a short time.

Fishing tactics

The technique of fishing with amphipods is practically no different from a balancer, with the only difference being that this bait is slower and more maneuverable. Movements can vary from light gliding to quick jerks, when the angle of inclination of the bait changes and it turns around randomly. The amphipod itself will not play - the fisherman gives it the game, so you need to master at least one method.

Standard Wiring Methods

The most common:

Rise, then pause and rise again - the bait will move in a spiral
The bait is placed on the tail and begins to turn around its axis
Uniform rise, followed by a descent to the bottom with twitching

Wiring "Eight"

Another interesting option that it is advisable to master is called the “eight”. Its essence is as follows:

The amphipod is located approximately 20 cm from the bottom
This is followed by a uniform rise of half a meter, after which the fishing rod sharply returns to its initial position
There is a pause of 8 seconds and the cycle is repeated 7 more times.

It doesn’t make much sense to do more repetitions, because... if the pike perch is nearby, it will definitely react. True, he does not always confidently attack the bait, so if a predator makes itself known, but the hook turns out to be empty, continue trying to force him to attack again.

To attract the attention of pike perch, you can experiment by additionally attaching polystyrene foam, woolen thread, or a piece of fabric to the hook of the amphipod. You can also try fishing with bait in the form of a fry or a piece of fish.

What’s interesting is that the pike perch bite in this case looks like a sharp blow or a stoppage of the bait. At times, sharp pokes may follow, but in such cases all hooks are empty, so be patient.

Where to fish

I think everyone knows that pike perch ambushes near various water obstacles. Therefore, most fishermen try experimentally, making numerous holes in an attempt to detect irregularities and changes in depth - holes and edges.

Then holes are made in the intended location, at a distance of about 5 meters from each other. Each hole is fished using both standard fishing methods and the figure-of-eight principle, which was described earlier.

Equipment and installation of bait

The amphipod is tied so that the convex side is directed upward. If you tie it the other way around, i.e. concave side up, then the bait will no longer play so sweepingly that it can only be used for catching a low-active predator.

Now regarding the fishing rod. Many fishermen use tackle with a curved handle, explaining this by the fact that at the moment of hooking the line will go up and it will be possible to reliably detect the pike perch. Thanks to this, you can use a fishing rod with a soft whip.

When fishing with a straight rod, you need a hard whip, otherwise the line will not go as it should, and the hook will be unreliable. The fishing line used is monofilament, with a diameter of 0.24-0.28 mm.

Also, for experimental purposes, you can attach a tee with woolen threads to the fishing line just above the bait.

To properly equip the amphipod we will need:

The amphipod itself
Needle
Scissors
Nipple
Tee
Braid, diameter 0.14-0.18 mm

When equipping, be sure to take into account that the amphipod must be located on a flat horizontal surface so that 2 single hooks are at the bottom. This is the only way he will show the right game.

First of all, using a needle in the bait, carefully clean the hole for the fishing line.
Next, we make a small loop of several turns from the braid, which is needed to quickly change the bait using a carabiner.
From top to bottom, through the hole in the side of the bait, we thread the braided line and put a nipple on it, which will protect the knot from increased loads and fix the tee.
Next, we tie a tee, the dimensions of which we select based on the size of the amphipod. The equipment is ready.

Making your own amphipod

Now amphipods can be easily purchased in almost any fishing store. However, some people prefer to make amphipods for pike perch with their own hands without the use of expensive materials. I'll tell you about several ways.

Easy way

We will need the following:

A piece of foam rubber or foam
Lead pellet, diameter 4-4.5 mm
Long shank hooks

The first thing we do is cut out an elongated blank from foam plastic. The workpiece is placed on a hook passed along it, and the forend is brought out. A small hole is made in the front part, through which a thread is passed and tied. It is left to protrude a little so that it looks like a mustache. The pellet will act as a sinker. The simplest amphipod is ready.

A more complicated method

Another manufacturing method, but more complicated. We will need the following components:

Metal protruding shape in the shape of a fish
Any sheet metal that can be easily processed
Lead solder
Soldering iron and phosphoric acid
Tee
Sandpaper
Paste GOI
Glue and wool threads

Now directly to production

Using a mandrel, we squeeze out our future bait from sheet metal; you can make two forms and then solder them together.
Fill the resulting form with lead from the convex side, or make an amphipod from two halves.
Solder the tee.
After cooling, treat the bait with sandpaper, then with GOI paste.
We glue the hairs to the tee - this is not necessary, you can tie them by experimenting as you fish.
One of the most important steps is making a hole for the fishing line, since it must be precisely calculated at the very center of gravity of the bait.
A piece of insulation is glued into the resulting hole for the fishing line, which will further prevent rapid chafing.

As you can see, this method is also not particularly difficult and is quite accessible to everyone.

Method for professionals

But the next method will be more labor-intensive. For this we need:

Wood block
A piece of lead
Styrofoam
Alabaster
Scotch
Ruler
Scissors
Tee and regular hooks
Paint with brushes

Now let's move on to manufacturing.

To begin with, a blank of our bait is cut out of polystyrene foam; here you should be as careful as possible, since the quality of the amphipod depends on this.
Next, take a wooden block and cover it with tape on all sides. This structure will be the formwork in the future; its height should be at least 2 cm
An alabaster solution is poured into the resulting mold, and the workpiece is immediately placed halfway into it, having previously treated it with a soapy mixture. You need to wait until the solution hardens.
Using a knife, 2 indentations are made, which will act as guides for the second half of the bait.
The formwork is made in the same way, the alabaster solution is poured.
After it hardens, the molds are separated and the workpiece is removed - its contours will be displayed on the alabaster.
Use a knife to make three small holes - molten lead is poured into one, the other is needed to release air, and the third will contain a hook. Before this, the form must be thoroughly dried.
An important point is to correctly determine the center of gravity - the bait should be in the water with its nose raised and one edge should be higher than the other. Based on this, holes for fastening are made.
The resulting bait is processed, removing all irregularities, and then painted in the preferred color.
The final stage is attaching the tee and forming the amphipod’s tail.

Amphipod models

If we talk about store options, then we can highlight the following.

Amphipod "Wasp"

One of the most popular options, having an original shape and bright predatory coloring. Such baits are available in different sizes, weighing from 8 to 17 grams. The largest of them have increased resistance when playing, which makes their behavior completely unpredictable. And even with slow wiring, the “Wasp” is capable of performing real miracles. That is why it has practically no competitors in reservoirs with standing water and weak currents.

Amphipod "Classic"

This bait is made in 3 weight varieties - 10, 15, 20, 25, 35 grams. A distinctive feature of lighter models is the ability to dive smoothly for a long time and make sweeping turns with simultaneous vibration. All this will not leave any predator indifferent. It has proven itself well on ponds, lakes and rivers with weak currents.

As for heavy universal amphipods - 25 and 35 grams, they are used at great depths, showing a bright game both directly under the hole and at a significant release. It is advisable to use it in areas with a moderate current, when caught in it, the bait, moving in short jerks, vibrates finely and tilts.

Universal amphipod

Here the name speaks for itself - the bait works in almost any conditions, a strong current will not be a hindrance for it. It is distinguished by a more compressed shape; when playing, it turns over on its side and makes a turn. Less active in the current, but in no way inferior in its effectiveness to other baits.

The beard, along with the foam fish, can be considered an original domestic invention. Although, perhaps this bait has analogues in other countries. In this post I will tell you what kind of bait this is - “Beard”, what design features it has, varieties and methods of fishing with a beard.

Wiring tackle with barbs is quite simple. By controlling the line at the bottom with a sinker, they play along with the rod, giving the barb various animations.

Catching an asp with a beard. Sergey Skazhutin. SubscribeSubscription completedCancel subscription. Catching pike perch on the Dnieper (on each cast) - Duration: 5:55 ANDI50102 17*** 4***1 views.
https://www.youtube.com/watch?v=oHqoRZESa9g
Spinning fishing from the shore. Tackle for zander (barb) Killer Walleye, two different tackles are used simultaneously... Added 2 years ago. Channel: AGAP TV. A method of catching pike perch using a Killer Walleye tackle with a spinning rod from a boat. Buy a beard for pike perch... Added 1 year ago. Channel: Killer Wal...
http://www.fassen.net/show/Beard for zander.
Catching asp with a beard - Duration: 1:5*** Sergey Skazhutin *** 732 views. Catching pike perch with a spinning rod from the shore - Duration: 16:54 1 FishMasta.ru - fishing, reports, reviews, videos. 33 17*** views.
https://www.youtube.com/watch?v=AioMdDRMXpA
Published: Mar 20 2013 On the website gribalka.com.ua - the nuances of catching pike perch with this tackle, how I implement them. On the video - the good old “grandfather’s” beard for pike perch, how I make it. tackle for asp - Duration: 5:23 Valentina Plavska 52 7***6 views.
https://www.youtube.com/watch?v=u-F7LvmWzrA
Pike perch beard - manufacturing. The classic goatee is a cambric carved from hard foam, a tee with tied goat hair and a leash with a weight, 1.5-2 meters long. Well, and not only that. How does the beard behave and what kind of wiring is used? There is room for imagination here, and only Sudak can limit it. As experienced warthogs say, when fishing with a beard, it is not the tackle, not the bait, but the hands and brains of the fisherman that work.
http://www.gribalka.com.ua/Stati/Primanki/Borodka-dlya-sudaka--izgotovlenie.html
Hi all!!! I want to share a method for making beards!! I’m very worried, the next videos I’ll suppress my excitement, but that’s not the point!!! I'm on VK: ht...Asp and pike perch are grabbed like dogs! Fishing with a jig, 5 casts - 5 trophies!
https://www.youtube.com/watch?v=4b3ZwrS6uQA
Fishing for an asp caught with a beard, a humorous parody of the video “ide the fish of my dreams” My partner in AIR Spinning fishing from the shore. Tackle for zander (barb) Killer Walleye, two different tackles are used simultaneously... Added 2 years ago.
http://www.fassen.net/show/Goatee
Catch a pike perch. Fishing in Kyiv. Catching an asp with a beard. Trolling with one spinning rod. Advice from experienced people. Zander fishing, trolling, line fishing. Fishing for pike perch using Killer Walleye tackle, catching trophies near the bottom. The best equipment for catching schooling perch. Malevka. Episode 6, Pike perch fillet or what a female pike perch eats in the spring. Tackle "Asp Killer".
http://portall.zp.ua/?c=video&q=Beard for pike perch
Please tell me about goatee fishing! Has anyone caught this amazing tackle with enta in our region? If possible, please attach...Keeping the speed of the bait is important. for example, pike perch mainly takes slow-swimming bait. or with frequent breaks during rewinding. To be honest, I haven’t been able to catch anything with this kind of gear except Zherek. but my dad caught it pretty well!
http://fishing-ua.com/threads/487/
Author: Bolshaya-Rybalka, views: 143***5. "Beard" is very popular among fishermen in the Kyiv region. With its help you can catch pike, pike perch, asp, perch and other predatory fish. Among the non-traditional trophies are saberfish, chub, and ide. The “beard” itself is not the key to success; it is only part of the tackle for catching these fish.